-
Twist drills HSS DIN 338-N 8.5 mm
-
– cobalt alloyed
– Ground
– Cylindrical
– Short
– Right-hand cutting,
– Cross ground from Ø 3 mm
– Powerful
– High concentricity
– accuracy
– Good chip removalHSS properties/material processing of:
– Stainless steel processing
– In alg. suitable for processing of workpieces with tensile strength above 800 N/mm² -
– cobalt alloyed
– Ground
– Cylindrical
– Short
– Right-hand cutting,
– Cross ground from Ø 3 mm
– Powerful
– High concentricity
– accuracy
– Good chip removalHSS properties/material processing of:
– Stainless steel processing
– In alg. suitable for processing workpieces with tensile strength above 800 N/mm² -
Twist drills HSS-G DIN 338-N
– DIN 338 type N
– Right hand cutting
– From Ø 3, mm with split point
acc. to DIN 1412 C
– Point angle: 118°
– Helix angle: 25-3°
– Tolerance: h57 -
Twist drills HSS-G DIN 338-N
– DIN 338 type N
– Right hand cutting
– From Ø 3, mm with split point
acc. to DIN 1412 C
– Point angle: 118°
– Helix angle: 25-3°
– Tolerance: h56 -
Twist drills HSS DIN 338-N 8.0 mm
-
Twist drills HSS-G DIN 338-N
– DIN 338 type N
– Right hand cutting
– From Ø 3, mm with split point
acc. to DIN 1412 C
– Point angle: 118°
– Helix angle: 25-3°
– Tolerance: h58 -
– cobalt alloyed
– Ground
– Cylindrical
– Short
– Right-hand cutting,
– Cross ground from Ø 3 mm
– Powerful
– High concentricity
– accuracy
– Good chip removalHSS properties/material processing of:
– Stainless steel processing
– In alg. suitable for processing of workpieces with tensile strength above 800 N/mm² -
– cobalt alloyed
– Ground
– Cylindrical
– Short
– Right-hand cutting,
– Cross ground from Ø 3 mm
– Powerful
– High concentricity
– accuracy
– Good chip removalHSS properties/material processing of:
– Stainless steel processing
– In alg. suitable for processing of workpieces with tensile strength above 800 N/mm² -
– cobalt alloyed
– Ground
– Cylindrical
– Short
– Right-hand cutting,
– Cross ground from Ø 3 mm
– Powerful
– High concentricity
– accuracy
– Good chip removalHSS properties/material processing of:
– Stainless steel processing
– In alg. suitable for processing of workpieces with tensile strength above 800 N/mm² -
Twist drills HSS-G DIN 338-N
– DIN 338 type N
– Right hand cutting
– From Ø 3, mm with split point
acc. to DIN 1412 C
– Point angle: 118°
– Helix angle: 25-3°
– Tolerance: h55 -
Twist drills HSS-G DIN 338-N
– DIN 338 type N
– Right hand cutting
– From Ø 3, mm with split point
acc. to DIN 1412 C
– Point angle: 118°
– Helix angle: 25-3°
– Tolerance: h54