General workshop equipment
-
Mechanical headlightbeam setter, complete with graduated
analogic or digital luxmeter, mirror visor.Column: height 1700 mm, working height 250-1450 mm, fixed on base
Sliding system with spring stop
Base: 3 wheels, Printed steel with concrete
Visor:mirror visor
optical box: plastic injection molded, fresnel lens, digital luxmeter, battery AA for luxmeter
Measuring range: up 2%; down 4%, left 6%/right 6%
Light Intensity: 0 ~ 150,000cd
Accuracy: Light Intensity check HB/LB ±5%
Available Options:
/L1 = laser pointer – lens centre
/LL = laser visor
/L2 = combined laser visor + pointer
/R = single rail kit
/Y = two parts column -
Universal wheel changing set 38113
-
Universal wheel changing set
composed of:
– Hydraulic trolley jack with double pump system for quick lifting, 2.5 t, from 100 – 460 mm
– Pair of jack stands, 3 t, from 280 – 420 mm
– Knee and seat pad
– Cross rim wrench, 1/2″, 17 – 19 – 22 mm
– LED inspection lamp COMPACT MINI 180
– PU working gloves, XL -
Graphical battery system analyser with internal printer
– Suitable for 12 V batteries (lead acid, gel, wet cell, MF, VRLA, calcium and AGM)
– Analyses the battery condition and internal resistance
– Checks the cranking health of the batterie, the alternator charging conditions and analyses the condition of the electrical return circuit contacts resistance
– Reverse polarity protected
– Full graphic display with touch pad and step by step instructions
– Save up to 70 test results
– No maintenance required; no internal battery
– Delivered in transport case -
Universal wheel changing set with
– 3 t trolley jack with quick lift pedal
– Pair of jack stands 3 t
– Knee and seat pad
– Cross rim wrench 17 × 19 × 22 mm × 1/2″ CrV
– Multi-function LED light/blinking warn light
– Mechanic’s working gloves L -
Wheel change kit
Consisting of:
– Hydraulic workshop shunting jack with quick lift foot pedal, 3.0 t, 145 -500 mm,
– Pair of stands, 3 t, 280 – 420 mm,
– knee and seat support,
– wheel cross, 1/2″”, 17 – 19 – 22 mm,
– COB LED hand lamp COMPACT MINI 180, rechargeable,
– PU work gloves XL -
Steel vise 200 mm / 8″
Compact design / Adjustable
Induction hardened sliding surface
Induction hardened and knurled pipe-gripping jaws
Protected trapezoidal spindle -
Steel vice 15 mm / 6″
Compact design
Adjustable
Induction hardened sliding surface
Hardened and knurled pipe gripper jaws
Protected trapezoidal spindle -
Steel vice 125 mm / 5″
Compact design
Adjustable
Induction hardened sliding surface
Hardened and knurled tubular gripping jaws
Protected trapezoidal spindle -
Voltage tester, LCD
The Test Profi III LCD is the new top model. The innovative two-pole voltage tester impresses with its wide performance range and practical one-hand operation. It enables testing without finger contact and, thanks to the highest safety level CAT IV 1000 V, is also suitable for testing hybrid and electric vehicles as well as photovoltaic systems.
Benefits
highest safety level CAT IV 1000 V
Large, illuminated LCD
voltage display up to 1000 V AC and 1400 V DC
resistance measurement up to 199.9 kΩ
frequency display up to 500 Hz
T-RMS test method for non-sinusoidal voltage e.g. in industry -
Ammeter clamp 1000 A
– Cable length: 1 m
– Voltage measurement
– Current measurement
– Diode test
– Continuity check
– Hold function
– Aperture of the pliers: 55 mm
– DC voltage: 600 V ± (0.5%+5)
– AC voltage: 600 V ± (1%+5)
– Direct current: 200 / 1000 A ± (2.5%+5)
– Alternating current: 200 / 1000 A ± (2.5%+5)
– Resistance: 200 Ohm ± (1.2%+5)
– Frequency: 2 kHz ± (2%+5)
– Power supply: 9 V x1
– Dimensions: 250 x 100 x 46 mm
– Weight: 365 g
– IEC 61010 CATII with overload protection
– 3-digit 16 mm backlit LCD screen
– Automatic scales
– Supplied with battery and cable -
Steel vice 100 mm / 4″
Compact design / Adjustable
Induction hardened sliding surface
Induction hardened and knurled pipe-gripping jaws
Protected trapezoidal spindle